How did you find the time at work to write the toolpaths?
It took maybe 15 minutes or so to program it at the machine.
For example here's a b.s. program for a rotor here....
O1000 (MINI SIREN ROTOR)
T404M8(TRIGON TURN)
G97S2500M3
G0X1.35Z0.
G1X-.04F.005
G0Z.05
X1.2
G1Z-.8F.01
X1.35
G0Z.05
X1.12
G1Z0.0F.005
X1.18Z-.03
Z-.8
X1.35
G0Z.05
X6.Z6.
M1
T1212M8(.2 WIDE FACE GROOVE)
G97S500M3
G0X1.08Z.05
G1Z-.44F.002
G0Z.05
X.78
G1Z-.44F.002
G0Z.05
X6.Z6.
M1
T1010M8(SPOT DRILL)
G97S2500M3
G0X0.0Z.05
G1Z-.05F.003
G0Z.05
X6.Z6.
M1
T202M8(DRILL)
G97S2500M3
G0X0.0Z.05
G83Z-.7Q400F.002
G0Z.05
X6.Z6.
M1
T606M8(REAM)
G97S1000M3
G0X0.0Z.05
G1Z-.7F.006
Z.05F.02
G0X6.Z6.
M1
T909M8(CUTOFF)
G97S1500M3
G0X1.3Z-.78M14
G1X-.02F.003
G0X1.3M15
X6.Z6.
M30%
Proud owner of a garage full of junk.