I don't think my other post went through, but I'm planning on removing a FEDELCODE near me and I don't know how to do it without a crane.
If you guys have an idea as to how, please say because this will be my first big siren.
What model of Fedelcode and how's it mounted? If it's a Model 2, chances are you could rent a scissor lift or boom lift and take it down with that. If it's anything bigger than that, you're not going to be able to safely bring it down without a crane.
I think that if the pole that it's on is as tall as the tower on that side it's next to you can probably rent a scissor lift to get up on top of the tower, take the housing off and then unbolt the Fedelcode core from the tower. It still might work even if the tower is not as tall as the tower, but you would have to carefully tip the siren onto a dolly and carry it onto the scissor lift along with the housing. It sounds crazy, but it might work!Fanman wrote: ↑Thu Mar 28, 2024 8:17 pmHere it is: It's a Model 5 on the side of the building...
https://www.google.com/maps/@40.9679967 ... ?entry=ttu
I'm broke which is why I'm asking for ways without a crane, if any...
I'm not trying to scare you off, but good luck getting anyone there to budge on it. I tried getting the thing about 15 years ago. I know the former head of security there (super nice guy) and was able to track down someone that was in charge of that building. They basically told me to fluff off and if I asked again they would get police involved and report me for trespassing despite knowing the head of security.Fanman wrote: ↑Thu Mar 28, 2024 8:17 pmHere it is: It's a Model 5 on the side of the building...
https://www.google.com/maps/@40.9679967 ... ?entry=ttu
I'm broke which is why I'm asking for ways without a crane, if any...
....Lifes great, I'm 58Rheems1 wrote: I petition that everyone who joins the board should have to put there age or year of birth in thier signature...32 here
Return to “Main Outdoor Warning Sirens Board”
Users browsing this forum: No registered users and 6 guests