Thu Aug 16, 2007 7:38 pm
exact or approx?
Here's the best I can get since mine is taken apart.
Projector is 51" long
The end of the projector is 28" square
The chopper housing and rotator box is 39" tall (without the chopper cap on)
The rotator box is 14"ish wide and 22" long and is 14" tall.
Projector support arm is approx 47" long, Mounting part to the projector is 11" long, the other end is 8" wide.
I have a 5.5 foot long bed on my truck, and it only fit in the back with the tailgate down.
so you would need like 6 foot x 3 foot x 5 foot tall spot to put it.
And would need someway to counter balance the cone. it may tip over.